Horizontal plastic bottle for hydroponic culture3

 

Next, we will produce plastic bottles for hydroponic supplementation.

This will automatically send water for hydroponic culture.

Prepare a plastic bottle.

(here we use 500 ml)

Cut the side of the bottom with a cutter and cut it out. The guideline for the hole to be opened is about 1 x 1.5 cm in height.

※ Be careful if the hole you open is too large or too small, as the water path will be worse.

 

 

 

 

Put water (fertilizer for hydroponic culture) in a plastic bottle, close it with a cap, and place it in a water pan.

There is a tip of a sideways plastic bottle cloth and it is completed.

It is very convenient that water is automatically added when the water runs out.

※ If you think that the cloth absorbs too much water, shorten the packing sheet or cut the cloth a little.

Can be used in conjunction with two or three

(If you use a large number, you can adjust by increasing the size of the water tray and plastic bottle.)

This completes the horizontal plastic bottle.
(＾◇＾)